Viewing:
Homepage
Accessories & Tools
Inta-lok Edges

Inta-lok Edges

Inta-lok Edges > Dark Grey
Inta-lok Edges > Black
From £8.95
per pack of 4
DIY Fit DIY Fit
Use Indoors Use Indoors

Summary
Specification
Questions (1)
Reviews

Edges for Inta-lok Tiles - packs of 4

Inta-lok tiles are made from 100% virgin (recyclable) injection moulded PVC and can be laid over any hard surface with minimum or no surface preparation.  The tiles are loose laid on the floor and are easily knocked into place using a rubber mallet.  No special tools are required for installation, just a mallet, sharp knife, tape measure and chalk line. These tiles have a Diamond Plate surface design.

In applications of extreme temperature fluctuations please contact us for advice.  Areas subject to direct sunlight may require fixing with adhesive.

Inta-lok tiles are 4mm thick and measure 508mm x 508mm, packed 8 tiles to a box.  Edges are available in a pack of 4.

Technical Specification

Tech Spec Standard Unit of Measure Inter-lok
Material PVC SG 1.37
Hardness ISO868 Shore A 80
Abrasion DIN5304

Nmn²

 15
Wear Resistance DIN5316

nm³

 87.9
Flame spread DIN51960 Class 1
Fire Resistance

ANSI/ASTM

E648 979

A/NFPA 235

1995 Critical Red

Flus

 Class 1
Electrical resistance DIN 53582 Ohms 1X1014
Anti-slip ASTMC 1028/89 Co-efficient of Very Good
Dimensional Stability NF EN404 % 0.40

Standard Indentation

under load

1.30

 

 
Sound absorbtion db up to 46 db up to 40db
Thermal resistant BS4745 Good
Thermal Conductivity Good

Uses

The Inta-lok tile has many uses from Nurseries to Gyms and Sports Halls as well as Garages and Retail Outlets.

The joining mechanism is virtually invisible when tiles of the same colour are joined together.  When tiles of different colours are joined, the mechanism creates an attractive 'jigsaw' type pattern.

Inta-lok tiles are made from 100% virgin (recyclable) injection moulded PVC and can be laid over any hard surface with minimum or no surface preparation.  The tiles are loose laid on the floor and are easily knocked into place using a rubber mallet.  No special tools are required for installation, just a mallet, sharp knife, tape measure and chalk line.

In applications of extreme temperature fluctuations please contact us for advice.  Areas subject to direct sunlight may require fixing with adhesive.

Inta-lok tiles are 4mm thick and measure 508mm x 508mm, packed 8 tiles to a box.  Edges and corners are also available.

0 stars No reviews have been written yet

Share your thoughts with other customers… write your own review

Hello, Can these tiles be used on a balcony outside. and are they free draining, Thank you for your time. from Sharon

Hello Sharon

Thank you for your enquiry.

Our Inta-lok tiles are not suitable for outdoor use as they are constructed from pvc which is not U.V stable/resistant and because they are of a solid construction, are not free draining.

We would recommend Piazza, Metro or Briq for your application as these are free draining outdoor modular tiles constructed from UV stable/resistant polypropylene.They are also anti-slip and can be layed over most sub-floors.

If your balcony has a single layer substrate then we would recommend the Piazza range our best selling tile for balconies, due to it's unique construction it will evenly distribute any load across it's surface.

I trust this is of help with your selection and if we can be of any further assisttance please don't hesitate to contact us.

The Tact Team

Ask a question about this Product