Viewing:
Homepage
Gym & Sports
Inta-lok Gym floor tiles

Inta-lok Gym floor tiles

Inta-lok Gym floor tiles > Black
Inta-lok Gym floor tiles > Dark Grey
From £28.55
per square metre (4 tiles)
Anti-slip Anti-slip
Bare-foot Friendly Bare-foot Friendly
DIY Fit DIY Fit
Durable Durable

Summary
Specification
Images (2)
Questions (1)
Reviews

Inta-lok tiles with a diamond plate pattern are ideal for Gyms where a solid finish floor surface is required.  Made from PVC these tiles are simple to lay by just tapping the interlocking pieces together with a rubber mallet.  The tiles have good slip-resistance and thermal resistance and are UV stable.

The joining mechanism is virtually invisible when tiles of the same colour are joined together.  When tiles of different colours are joined, the mechanism creates an attractive 'jigsaw' type pattern.

Uses

The Inta-lok tile has many uses from Nurseries to Gyms and Sports Halls as well as Garages and Retail Outlets.

Inta-lok tiles are made from 100% virgin (recyclable) injection moulded PVC and can be laid over any hard surface with minimum or no surface preparation.  The tiles are loose laid on the floor and are easily knocked into place using a rubber mallet.  No special tools are required for installation, just a mallet, sharp knife, tape measure and chalk line.  These tiles have a Diamond Plate surface design.

In applications of extreme temperature fluctuations please contact us for advice.  Areas subject to direct sunlight may require fixing with adhesive.

Inta-lok tiles are 4mm thick and measure 508mm x 508mm, packed 8 tiles to a box.  Edges and corners are also available.

Technical Specification

Tech Spec Standard Unit of Measure Inter-lok
Material PVC SG 1.37
Hardness ISO868 Shore A 80
Abrasion DIN5304

Nmn²

 15
Wear Resistance DIN5316

nm³

 87.9
Flame spread DIN51960 Class 1
Fire Resistance

ANSI/ASTM

E648 979

A/NFPA 235

1995 Critical Red

Flus

 Class 1
Electrical resistance DIN 53582 Ohms 1X1014
Anti-slip ASTMC 1028/89 Co-efficient of Very Good
Dimensional Stability NF EN404 % 0.40

Standard Indentation

under load

1.30

 

 
Sound absorbtion db up to 46 db up to 40db
Thermal resistant BS4745 Good
Thermal Conductivity Good
0 stars No reviews have been written yet

Share your thoughts with other customers… write your own review

I would like to know if it's possible to fit these in our personal training studio on top of carpet tiles. The carpet tiles have been glued onto the concrete floor and would leave a few bumps and marks if we removed them. Thanks, David Sinclair

Hello David,

Thank you for your enquiry.

Our Inta-Lok tiles are a 4mm flexible pvc tile which should be layed on a solid level base to avoid any uneven movement underneath therefore preventing the "jigsaw joints" from connecting correctly.

I would advise the uplift of the carpet tiles then a levelling screed if required.

I hope this helps.

Regards

The Tact Team

Ask a question about this Product